10-Pin Right-Angle vs 4-Pin Flip-Down FFC/FPC Board: Which Fits Your Build?

These FFC/FPC adapter boards are close in listed price but serve different connector layouts. Choose the Zaplyte two-board option for its 10-pin right-angle format, or the uxcell board for a 4-pin flip-down arrangement.

Last updated Aug 17, 2026

Choosing an adapter board for computers peripherals work is less about a small listed-price gap and more about matching the cable socket, pin count, and header arrangement your project requires. These two FFC/FPC boards sit only $1.47 apart, but their formats are aimed at distinctly different connection layouts.

Quick verdict

Both options are new cable connectors intended for flexible cables or flexible printed circuit boards, and both specify a 2.54 mm DIP pitch. The decision turns on the connector configuration rather than a shared purpose.

Choose the 2pcs FFC FPC Connector Board 10 Pin Double Row Right Angle Pin Header Adapter when a 10-pin board with right-angle headers is the needed format and a two-board package makes sense for the project. Choose the 4Pin 1.0 to 2.54 mm Double Row of Bent Pins Flip-down FFC FPC Adapter Board when the required connection calls for its four-pin, flip-down layout.

At-a-glance comparison

Product	Listed price	Connector configuration	Overall size
Zaplyte 10-pin right-angle board	USD 13.37	10 pins; 0.5 mm socket-side pitch; 1.0 mm back-side pitch	33 x 20 mm
uxcell 4-pin flip-down board	USD 14.84	4 pins; 1.0 mm socket-side pitch; 0.5 mm back-side pitch	33 x 17.5 mm

Where each product wins

Zaplyte wins on listed price. At USD 13.37, the 2pcs FFC FPC Connector Board is the lower-priced choice, with a $1.47 gap versus the uxcell board. That makes it the natural selection when its specific board format already matches the connection required.

uxcell wins for a four-pin flip-down application. The 4Pin 1.0 to 2.54 mm Double Row of Bent Pins Flip-down FFC FPC Adapter Board is the more direct fit when that pin count and flip-down style are central to the design. Its listed size is also slightly narrower at 17.5 mm wide rather than 20 mm wide.

Product notes

Zaplyte 10-Pin Right-Angle FFC/FPC Board

The strongest reason to select the Zaplyte board is in the package title: it contains two FFC/FPC connector boards. That is useful for a project needing a matching pair of adapters rather than a single board. The description also identifies a double-sided board with a single flat-cable socket, giving the format a clearly defined role in compact electronics connections. Its limitation is equally specific: the 10-pin, double-row, right-angle pin-header arrangement is tailored to that connection geometry. It is a focused choice for a build that calls for those specifications, not a substitute for the four-pin flip-down configuration. Brand: Zaplyte.

uxcell 4-Pin Flip-Down FFC/FPC Adapter Board

The uxcell board makes the case for itself through its four-pin format and flip-down FFC/FPC adapter design. For a connection that calls for a 1.0 mm socket-side pitch and 0.5 mm back-side pitch, that arrangement directly matches the stated configuration. The board is also described as 33 x 17.5 mm, which may suit a layout where the narrower listed width matters. The limitation is its dedicated four-pin format: it is intended for that particular connector requirement rather than a 10-pin right-angle header setup. The package description specifies one FPC/FFC connector board, so it suits a one-board requirement. Brand: uxcell.

Final choice by use case

Pick the Zaplyte 2pcs FFC FPC Connector Board for a project that needs two matching boards and the specified right-angle adapter format, while keeping the listed price at the lower end of this comparison. Pick the uxcell 4Pin Flip-down FFC FPC Adapter Board when a single-board project needs its four-pin flip-down arrangement. In either case, the deciding factor is the required connector geometry and pitch pairing, not the modest price spread.

Products in this article